Product Description

SPROCKET  1/2” X 5/16”  08B Collection SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 13.0mm
Radius Width C 1.3mm
Tooth Width b1 seven.0mm
Tooth Width B1 7.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B Sequence ROLLER CHAINS  
Pitch 12.7 mm
Internal Width seven.seventy five mm
Roller Diameter eight.51 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
eight 37.2  33.18  8 10 ten
nine forty one.0  37.13  eight ten 10
ten forty five.2  forty one.10  8 ten ten
11 48.7  45.07  10 ten 12
12 fifty three.0  49.07  ten ten 12
13 57.4  53.06  ten ten 12
14 61.8  57.07  ten ten twelve
fifteen 65.5  61.09  ten ten twelve
16 sixty nine.5  sixty five.10  ten 12 16
17 seventy three.6  sixty nine.11  10 12 sixteen
eighteen 77.8  seventy three.14  ten twelve 16
19 81.7  seventy seven.16  ten twelve 16
twenty eighty five.8  eighty one.19  ten twelve 16
21 89.7  eighty five.22  12 sixteen 16
22 93.8  89.24  twelve sixteen 16
23 98.2  93.27  12 16 16
24 one hundred and one.8  ninety seven.29  twelve 16 16
twenty five 105.8  101.33  12 16 sixteen
26 110.0  one zero five.36  sixteen sixteen 16
27 114.0  109.40  16 16 16
28 118.0  113.42  16 sixteen sixteen
29 122.0  117.46  16 sixteen sixteen
30 126.1  121.50  sixteen 16 sixteen
31 a hundred thirty.2  a hundred twenty five.54  16 sixteen twenty
32 134.3  129.56  16 sixteen twenty
33 138.4  133.60  sixteen sixteen 20
34 142.6  137.64  16 16 twenty
35 146.7  141.68  16 16 twenty
36 151.0  145.72  sixteen 20 twenty
37 154.6  149.76  sixteen twenty 20
38 158.6  153.80  sixteen 20 twenty
39 162.7  157.83  16 20 20
forty 166.8  161.87  sixteen 20 20
41 171.4  a hundred sixty five.91  20 twenty twenty five
42 175.4  169.94  twenty 20 twenty five
43 179.7  173.98  twenty 20 25
44 183.8  178.02  twenty twenty 25
forty five 188.0  182.07  20 20 twenty five
46 192.1  186.10  twenty twenty 25
47 196.2  a hundred ninety.14  twenty 20 25
48 200.3  194.18  twenty 20 25
forty nine 204.3  198.22  twenty twenty twenty five
50 208.3  202.26  20 20 25
fifty one 212.1  206.30  20 25 25
fifty two 216.1  210.34  20 twenty five 25
fifty three 220.2  214.37  20 twenty five twenty five
54 224.1  218.43  20 25 25
fifty five 228.1  222.46  20 25 25
fifty six 232.2  226.50  twenty 25 25
fifty seven 236.4  230.54  20 twenty five twenty five
58 240.5  234.58  twenty 25 25
59 244.5  238.62  twenty 25 25
sixty 248.6  242.66  twenty 25 25
sixty two 256.9  250.74  25 twenty five 25
sixty four 265.1  258.82  twenty five 25 25
65 269.0  262.86  twenty five twenty five 25
sixty six 273.0  266.91  twenty five 25 twenty five
sixty eight 281.0  274.99  twenty five twenty five 25
70 289.0  283.07  twenty five twenty five 25
seventy two 297.2  291.15  25 twenty five 25
75 309.2  303.28  twenty five 25 twenty five
76 313.2  307.32  twenty five 25 25
seventy eight 321.4  315.40  twenty five 25 25
80 329.4  323.49  twenty five twenty five twenty five
85 349.0  343.69  25 twenty five 25
ninety 369.9  363.90  twenty five 25 twenty five
ninety five 390.1  384.11  25 25 25
a hundred 410.3  404.32  25 25 25
110 450.7  444.74  twenty five twenty five 25
114 466.9  460.91  25 twenty five 25
a hundred and twenty 491.2  485.16  25 twenty five 25
a hundred twenty five 511.3  505.37  twenty five 25 twenty five

Basic Info.

Type:

Simplex, Duplex, Triplex

Sprocket Model:

three/8″,1/2″,5/8″,3/4″,1″,1.25″,1.50″,1.75″,2.00″,2.twenty five”,2.00″,2.twenty five”,2.50″, 3″

Tooth Variety:

nine-100

Regular:

ANSI , JIS, DIN, ISO

Content:

1571, 1045, SS304 , SS316  As For every Person Ask for.

Overall performance Treatment method:

Carburizing, Substantial Frequency Treatment method, Hardening and Tempering, Nitriding

Area Treatment:

Black of Oxidation, Zincing, Nickelage.

Attribute Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, and so forth
Style criterion ISO DIN ANSI & Buyer Drawings
Application Industrial transmission tools
Package Picket Circumstance / Container and pallet, or manufactured-to-buy

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Closing-verify

Sample:

ODM&OEM, Demo Get Available and Welcome

Advantage Quality very first, Service very first, Competitive price tag, Quick supply
Shipping Time ten times for samples. 15 times for official order.

 

Set up AND Employing

The chain spocket, as a generate or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat facet surfaces  parallel to the centre aircraft of the chain hyperlinks, and outer surfaces at right angles to the chain website link centre plane. The chain back links are pressed firmly from the outer surfaces and every single of the aspect surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel human body collectively with the end sides of the webs formed by the foremost and trailing partitions of the pocket.

Notice

When fitting new chainwheels it is quite crucial that a new chain is equipped at the identical time, and vice versa. Employing an old chain with new sprockets, or a new chain with old sprockets will trigger quick use.

It is essential if you are installing the chainwheels by yourself to have the manufacturing facility service handbook particular to your product. Our chainwheels are created to be a direct substitution for your OEM chainwheels and as this sort of, the set up should be executed according to your types support manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Employing a chain which has been stretched a lot more than the previously mentioned maximum allowance causes the chain to journey up the teeth of the sprocket. This triggers hurt to the tips of the chainwheels enamel, as the drive transmitted by the chain is transmitted entirely through the prime of the tooth, fairly than the total tooth. This final results in severe putting on of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Standards companies (these kinds of as ANSI and ISO) maintain requirements for style, dimensions, and interchangeability of transmission chains. For case in point, the pursuing Table shows data from ANSI regular B29.1-2011 (Precision Energy Transmission Roller Chains, Attachments, and Sprockets) produced by the American Society of Mechanical Engineers (ASME). See the references[8][9][ten] for additional info.

ASME/ANSI B29.1-2011 Roller Chain Normal SizesSizePitchMaximum Roller DiameterMinimum Supreme Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Common Measurements
Dimensions Pitch Maximum Roller Diameter Least Final Tensile Strength Measuring Load
25 .250 in (6.35 mm) .a hundred thirty in (3.30 mm) 780 lb (350 kg) eighteen lb (8.2 kg)
35 .375 in (9.53 mm) .200 in (5.08 mm) 1,760 lb (800 kg) eighteen lb (8.2 kg)
41 .500 in (twelve.70 mm) .306 in (7.seventy seven mm) 1,five hundred lb (680 kg) eighteen lb (8.2 kg)
forty .five hundred in (12.70 mm) .312 in (7.ninety two mm) 3,one hundred twenty five lb (1,417 kg) 31 lb (fourteen kg)
fifty .625 in (15.88 mm) .four hundred in (ten.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 .750 in (19.05 mm) .469 in (11.91 mm) 7,030 lb (3,one hundred ninety kg) 70 lb (32 kg)
80 1.000 in (twenty five.40 mm) .625 in (15.88 mm) 12,five hundred lb (5,seven-hundred kg) one hundred twenty five lb (fifty seven kg)
100 one.250 in (31.seventy five mm) .750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) .875 in (22.23 mm) 28,one hundred twenty five lb (twelve,757 kg) 281 lb (127 kg)
one hundred forty 1.750 in (forty four.forty five mm) 1.000 in (twenty five.forty mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 two.000 in (50.80 mm) 1.one hundred twenty five in (28.58 mm) fifty,000 lb (23,000 kg) 500 lb (230 kg)
a hundred and eighty 2.250 in (57.fifteen mm) one.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 two.five hundred in (63.50 mm) 1.562 in (39.67 mm) seventy eight,175 lb (35,460 kg) 781 lb (354 kg)
240 three.000 in (seventy six.twenty mm) 1.875 in (forty seven.sixty three mm) 112,five hundred lb (fifty one,000 kg) 1,000 lb (450 kg

For mnemonic purposes, underneath is one more presentation of crucial dimensions from the very same normal, expressed in fractions of an inch (which was component of the considering driving the selection of desired figures in the ANSI common):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain variety
Width (inches)
one4 28 twofive oneeight
38 threeeight three5 3sixteen
one2 four8 four1 one4
1two foureight 4 fivesixteen
fiveeight fiveeight five three8
34 68 6 1two
1 eighteight eight five8

Notes:
1. The pitch is the length between roller centers. The width is the distance in between the url plates (i.e. marginally far more than the roller width to allow for clearance).
two. The proper-hand digit of the normal denotes 0 = typical chain, 1 = light-weight chain, 5 = rollerless bushing chain.
three. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
four. An “H” subsequent the regular variety denotes heavyweight chain. A hyphenated amount following the regular amount denotes double-strand (2), triple-strand (3), and so on. As a result 60H-3 denotes number 60 heavyweight triple-strand chain.
 A standard bicycle chain (for derailleur gears) makes use of slender 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load potential. The much more sprockets at the rear wheel (traditionally 3-6, these days 7-12 sprockets), the narrower the chain. Chains are bought in accordance to the quantity of speeds they are developed to work with, for example, “10 pace chain”. Hub equipment or single pace bicycles use 1/2″ x 1/8″ chains, in which 1/8″ refers to the optimum thickness of a sprocket that can be utilized with the chain.

Typically chains with parallel formed backlinks have an even quantity of back links, with every narrow link adopted by a broad one particular. Chains built up with a uniform kind of website link, narrow at 1 and broad at the other conclude, can be created with an odd number of backlinks, which can be an edge to adapt to a special chainwheel-distance on the other side this kind of a chain tends to be not so sturdy.

Roller chains created making use of ISO regular are often called as isochains.

 

WHY Pick US 
 

1. Dependable High quality Assurance Technique
2. Reducing-Edge Computer-Managed CNC Devices
3. Bespoke Answers from Very Experienced Professionals
four. Customization and OEM Available for Certain Software
five. Comprehensive Stock of Spare Elements and Accessories
6. Well-Designed Globally Advertising Network
7. Productive Right after-Sale Provider Program

 

The 219 sets of sophisticated computerized creation tools offer ensures for substantial product good quality. The 167 engineers and experts with senior expert titles can style and produce products to meet the exact needs of consumers, and OEM customizations are also obtainable with us. Our sound world-wide support network can offer clients with timely soon after-revenue specialized companies.

We are not just a producer and supplier, but also an business advisor. We work professional-actively with you to supply expert guidance and merchandise tips in get to end up with a most expense efficient item offered for your particular software. The clientele we serve around the world assortment from end users to distributors and OEMs. Our OEM replacements can be substituted wherever essential and appropriate for both fix and new assemblies.

 

US $0.18-1
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: 7*24hours
Warranty: 1 Year
Customized: Customized
Condition: New
Power Source: Electric
Automatic Grade: Manual

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 13.0mm
Radius Width C 1.3mm
Tooth Width b1 7.0mm
Tooth Width B1 7.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B SERIES ROLLER CHAINS  
Pitch 12.7 mm
Internal Width 7.75 mm
Roller Diameter 8.51 mm

###

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 37.2  33.18  8 10 10
9 41.0  37.13  8 10 10
10 45.2  41.10  8 10 10
11 48.7  45.07  10 10 12
12 53.0  49.07  10 10 12
13 57.4  53.06  10 10 12
14 61.8  57.07  10 10 12
15 65.5  61.09  10 10 12
16 69.5  65.10  10 12 16
17 73.6  69.11  10 12 16
18 77.8  73.14  10 12 16
19 81.7  77.16  10 12 16
20 85.8  81.19  10 12 16
21 89.7  85.22  12 16 16
22 93.8  89.24  12 16 16
23 98.2  93.27  12 16 16
24 101.8  97.29  12 16 16
25 105.8  101.33  12 16 16
26 110.0  105.36  16 16 16
27 114.0  109.40  16 16 16
28 118.0  113.42  16 16 16
29 122.0  117.46  16 16 16
30 126.1  121.50  16 16 16
31 130.2  125.54  16 16 20
32 134.3  129.56  16 16 20
33 138.4  133.60  16 16 20
34 142.6  137.64  16 16 20
35 146.7  141.68  16 16 20
36 151.0  145.72  16 20 20
37 154.6  149.76  16 20 20
38 158.6  153.80  16 20 20
39 162.7  157.83  16 20 20
40 166.8  161.87  16 20 20
41 171.4  165.91  20 20 25
42 175.4  169.94  20 20 25
43 179.7  173.98  20 20 25
44 183.8  178.02  20 20 25
45 188.0  182.07  20 20 25
46 192.1  186.10  20 20 25
47 196.2  190.14  20 20 25
48 200.3  194.18  20 20 25
49 204.3  198.22  20 20 25
50 208.3  202.26  20 20 25
51 212.1  206.30  20 25 25
52 216.1  210.34  20 25 25
53 220.2  214.37  20 25 25
54 224.1  218.43  20 25 25
55 228.1  222.46  20 25 25
56 232.2  226.50  20 25 25
57 236.4  230.54  20 25 25
58 240.5  234.58  20 25 25
59 244.5  238.62  20 25 25
60 248.6  242.66  20 25 25
62 256.9  250.74  25 25 25
64 265.1  258.82  25 25 25
65 269.0  262.86  25 25 25
66 273.0  266.91  25 25 25
68 281.0  274.99  25 25 25
70 289.0  283.07  25 25 25
72 297.2  291.15  25 25 25
75 309.2  303.28  25 25 25
76 313.2  307.32  25 25 25
78 321.4  315.40  25 25 25
80 329.4  323.49  25 25 25
85 349.0  343.69  25 25 25
90 369.9  363.90  25 25 25
95 390.1  384.11  25 25 25
100 410.3  404.32  25 25 25
110 450.7  444.74  25 25 25
114 466.9  460.91  25 25 25
120 491.2  485.16  25 25 25
125 511.3  505.37  25 25 25

###

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8",1/2",5/8",3/4",1",1.25",1.50",1.75",2.00",2.25",2.00",2.25",2.50", 3"

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1020, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire ResistantOil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome

Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

###

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

###

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58
US $0.18-1
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: 7*24hours
Warranty: 1 Year
Customized: Customized
Condition: New
Power Source: Electric
Automatic Grade: Manual

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 13.0mm
Radius Width C 1.3mm
Tooth Width b1 7.0mm
Tooth Width B1 7.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B SERIES ROLLER CHAINS  
Pitch 12.7 mm
Internal Width 7.75 mm
Roller Diameter 8.51 mm

###

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 37.2  33.18  8 10 10
9 41.0  37.13  8 10 10
10 45.2  41.10  8 10 10
11 48.7  45.07  10 10 12
12 53.0  49.07  10 10 12
13 57.4  53.06  10 10 12
14 61.8  57.07  10 10 12
15 65.5  61.09  10 10 12
16 69.5  65.10  10 12 16
17 73.6  69.11  10 12 16
18 77.8  73.14  10 12 16
19 81.7  77.16  10 12 16
20 85.8  81.19  10 12 16
21 89.7  85.22  12 16 16
22 93.8  89.24  12 16 16
23 98.2  93.27  12 16 16
24 101.8  97.29  12 16 16
25 105.8  101.33  12 16 16
26 110.0  105.36  16 16 16
27 114.0  109.40  16 16 16
28 118.0  113.42  16 16 16
29 122.0  117.46  16 16 16
30 126.1  121.50  16 16 16
31 130.2  125.54  16 16 20
32 134.3  129.56  16 16 20
33 138.4  133.60  16 16 20
34 142.6  137.64  16 16 20
35 146.7  141.68  16 16 20
36 151.0  145.72  16 20 20
37 154.6  149.76  16 20 20
38 158.6  153.80  16 20 20
39 162.7  157.83  16 20 20
40 166.8  161.87  16 20 20
41 171.4  165.91  20 20 25
42 175.4  169.94  20 20 25
43 179.7  173.98  20 20 25
44 183.8  178.02  20 20 25
45 188.0  182.07  20 20 25
46 192.1  186.10  20 20 25
47 196.2  190.14  20 20 25
48 200.3  194.18  20 20 25
49 204.3  198.22  20 20 25
50 208.3  202.26  20 20 25
51 212.1  206.30  20 25 25
52 216.1  210.34  20 25 25
53 220.2  214.37  20 25 25
54 224.1  218.43  20 25 25
55 228.1  222.46  20 25 25
56 232.2  226.50  20 25 25
57 236.4  230.54  20 25 25
58 240.5  234.58  20 25 25
59 244.5  238.62  20 25 25
60 248.6  242.66  20 25 25
62 256.9  250.74  25 25 25
64 265.1  258.82  25 25 25
65 269.0  262.86  25 25 25
66 273.0  266.91  25 25 25
68 281.0  274.99  25 25 25
70 289.0  283.07  25 25 25
72 297.2  291.15  25 25 25
75 309.2  303.28  25 25 25
76 313.2  307.32  25 25 25
78 321.4  315.40  25 25 25
80 329.4  323.49  25 25 25
85 349.0  343.69  25 25 25
90 369.9  363.90  25 25 25
95 390.1  384.11  25 25 25
100 410.3  404.32  25 25 25
110 450.7  444.74  25 25 25
114 466.9  460.91  25 25 25
120 491.2  485.16  25 25 25
125 511.3  505.37  25 25 25

###

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8",1/2",5/8",3/4",1",1.25",1.50",1.75",2.00",2.25",2.00",2.25",2.50", 3"

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1020, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire ResistantOil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome

Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

###

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

###

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Helical, Straight-Cut, and Spiral-Bevel Gears

If you are planning to use bevel gears in your machine, you need to understand the differences between Helical, Straight-cut, and Spiral bevel gears. This article will introduce you to these gears, as well as their applications. The article will also discuss the benefits and disadvantages of each type of bevel gear. Once you know the differences, you can choose the right gear for your machine. It is easy to learn about spiral bevel gears.
gear

Spiral bevel gear

Spiral bevel gears play a critical role in the aeronautical transmission system. Their failure can cause devastating accidents. Therefore, accurate detection and fault analysis are necessary for maximizing gear system efficiency. This article will discuss the role of computer aided tooth contact analysis in fault detection and meshing pinion position errors. You can use this method to detect problems in spiral bevel gears. Further, you will learn about its application in other transmission systems.
Spiral bevel gears are designed to mesh the gear teeth more slowly and appropriately. Compared to straight bevel gears, spiral bevel gears are less expensive to manufacture with CNC machining. Spiral bevel gears have a wide range of applications and can even be used to reduce the size of drive shafts and bearings. There are many advantages to spiral bevel gears, but most of them are low-cost.
This type of bevel gear has three basic elements: the pinion-gear pair, the load machine, and the output shaft. Each of these is in torsion. Torsional stiffness accounts for the elasticity of the system. Spiral bevel gears are ideal for applications requiring tight backlash monitoring and high-speed operations. CZPT precision machining and adjustable locknuts reduce backlash and allow for precise adjustments. This reduces maintenance and maximizes drive lifespan.
Spiral bevel gears are useful for both high-speed and low-speed applications. High-speed applications require spiral bevel gears for maximum efficiency and speed. They are also ideal for high-speed and high torque, as they can reduce rpm without affecting the vehicle’s speed. They are also great for transferring power between two shafts. Spiral bevel gears are widely used in automotive gears, construction equipment, and a variety of industrial applications.

Hypoid bevel gear

The Hypoid bevel gear is similar to the spiral bevel gear but differs in the shape of the teeth and pinion. The smallest ratio would result in the lowest gear reduction. A Hypoid bevel gear is very durable and efficient. It can be used in confined spaces and weighs less than an equivalent cylindrical gear. It is also a popular choice for high-torque applications. The Hypoid bevel gear is a good choice for applications requiring a high level of speed and torque.
The Hypoid bevel gear has multiple teeth that mesh with each other at the same time. Because of this, the gear transmits torque with very little noise. This allows it to transfer a higher torque with less noise. However, it must be noted that a Hypoid bevel gear is usually more expensive than a spiral bevel gear. The cost of a Hypoid bevel gear is higher, but its benefits make it a popular choice for some applications.
A Hypoid bevel gear can be made of several types. They may differ in the number of teeth and their spiral angles. In general, the smaller hypoid gear has a larger pinion than its counterpart. This means that the hypoid gear is more efficient and stronger than its bevel cousin. It can even be nearly silent if it is well lubricated. Once you’ve made the decision to get a Hypoid bevel gear, be sure to read up on its benefits.
Another common application for a Hypoid bevel gear is in automobiles. These gears are commonly used in the differential in automobiles and trucks. The torque transfer characteristics of the Hypoid gear system make it an excellent choice for many applications. In addition to maximizing efficiency, Hypoid gears also provide smoothness and efficiency. While some people may argue that a spiral bevel gear set is better, this is not an ideal solution for most automobile assemblies.
gear

Helical bevel gear

Compared to helical worm gears, helical bevel gears have a small, compact housing and are structurally optimized. They can be mounted in various ways and feature double chamber shaft seals. In addition, the diameter of the shaft and flange of a helical bevel gear is comparable to that of a worm gear. The gear box of a helical bevel gear unit can be as small as 1.6 inches, or as large as eight cubic feet.
The main characteristic of helical bevel gears is that the teeth on the driver gear are twisted to the left and the helical arc gears have a similar design. In addition to the backlash, the teeth of bevel gears are twisted in a clockwise and counterclockwise direction, depending on the number of helical bevels in the bevel. It is important to note that the tooth contact of a helical bevel gear will be reduced by about ten to twenty percent if there is no offset between the two gears.
In order to create a helical bevel gear, you need to first define the gear and shaft geometry. Once the geometry has been defined, you can proceed to add bosses and perforations. Then, specify the X-Y plane for both the gear and the shaft. Then, the cross section of the gear will be the basis for the solid created after revolution around the X-axis. This way, you can make sure that your gear will be compatible with the pinion.
The development of CNC machines and additive manufacturing processes has greatly simplified the manufacturing process for helical bevel gears. Today, it is possible to design an unlimited number of bevel gear geometry using high-tech machinery. By utilizing the kinematics of a CNC machine center, you can create an unlimited number of gears with the perfect geometry. In the process, you can make both helical bevel gears and spiral bevel gears.

Straight-cut bevel gear

A straight-cut bevel gear is the easiest to manufacture. The first method of manufacturing a straight bevel gear was to use a planer with an indexing head. Later, more efficient methods of manufacturing straight bevel gears were introduced, such as the Revacycle system and the Coniflex system. The latter method is used by CZPT. Here are some of the main benefits of using a straight-cut bevel gear.
A straight-cut bevel gear is defined by its teeth that intersect at the axis of the gear when extended. Straight-cut bevel gears are usually tapered in thickness, with the outer part being larger than the inner portion. Straight-cut bevel gears exhibit instantaneous lines of contact, and are best suited for low-speed, static-load applications. A common application for straight-cut bevel gears is in the differential systems of automobiles.
After being machined, straight-cut bevel gears undergo heat treatment. Case carburizing produces gears with surfaces of 60-63 Rc. Using this method, the pinion is 3 Rc harder than the gear to equalize wear. Flare hardening, flame hardening, and induction hardening methods are rarely used. Finish machining includes turning the outer and inner diameters and special machining processes.
The teeth of a straight-cut bevel gear experience impact and shock loading. Because the teeth of both gears come into contact abruptly, this leads to excessive noise and vibration. The latter limits the speed and power transmission capacity of the gear. On the other hand, a spiral-cut bevel gear experiences gradual but less-destructive loading. It can be used for high-speed applications, but it should be noted that a spiral-cut bevel gear is more complicated to manufacture.
gear

Spur-cut bevel gear

CZPT stocks bevel gears in spiral and straight tooth configurations, in a range of ratios from 1.5 to five. They are also highly remachinable except for the teeth. Spiral bevel gears have a low helix angle and excellent precision properties. CZPT stock bevel gears are manufactured using state-of-the-art technologies and know-how. Compared with spur-cut gears, these have a longer life span.
To determine the strength and durability of a spur-cut bevel gear, you can calculate its MA (mechanical advantage), surface durability (SD), and tooth number (Nb). These values will vary depending on the design and application environment. You can consult the corresponding guides, white papers, and technical specifications to find the best gear for your needs. In addition, CZPT offers a Supplier Discovery Platform that allows you to discover more than 500,000 suppliers.
Another type of spur gear is the double helical gear. It has both left-hand and right-hand helical teeth. This design balances thrust forces and provides extra gear shear area. Helical gears, on the other hand, feature spiral-cut teeth. While both types of gears may generate significant noise and vibration, helical gears are more efficient for high-speed applications. Spur-cut bevel gears may also cause similar effects.
In addition to diametral pitch, the addendum and dedendum have other important properties. The dedendum is the depth of the teeth below the pitch circle. This diameter is the key to determining the center distance between two spur gears. The radius of each pitch circle is equal to the entire depth of the spur gear. Spur gears often use the addendum and dedendum angles to describe the teeth.

China High Quality ISO/DIN/Agma Standard Steel Industrial Transmission Chain Gear with Blackening Simplex Duplex Triplex Sprockets     with Hot sellingChina High Quality ISO/DIN/Agma Standard Steel Industrial Transmission Chain Gear with Blackening Simplex Duplex Triplex Sprockets     with Hot selling
editor by czh 2023-01-23